In this not starting Maytag gas dryer page you will find the videos that will show you the parts that you will need to check when your Maytag gas dryer is not starting. Make sure that you watch the videos a few times until you know how to check & replace the parts.
Taking the dryer apart
One of the first things that you need to learn to fix a not starting Maytag gas dryer is how to dismantle the dryer and how to put it back together again properly. Try to learn how to do this first and everything else will be much easier to do.
Voltage at the wall outlet
The first thing you need to check when your Maytag gas dryer is not starting in any of the cycles that you try it on is the voltage at the wall outlet. Watch the video below to learn how to check the voltage.
The thermal fuse is a safety device use to blow and stop the motor from running if the temperature inside of the dryer surpass the setting on the thermal fuse. This could be the reason for your not starting Maytag electric dryer
This switch is used to get the motor running after setting the timer in the any of the drying cycles. If this switch is bad, the dryer will not do anything until you replace it with a good working switch.
This is a safety device used to stop the motor from running if the door on the dryer is opened when the dryer is running in a drying cycle. If the dryer door is opened during a drying cycle the dryer will stop running and you need to close the door and press the start switch to get the dryer running again.
This is the brain of the dryer and it is in charge of sending electricity to each of the electrical parts in the dryer that need to be working during a drying cycle. The timer has many contacts that close and open during a drying cycle. Watch the timer video to see how to check and replace it.
The job of the motor is to turn the belt that turns the tumbler and to close the circuit of the heating element to produce the heat to dry the clothes. If the motor doesn’t run, the dryer will not do anything. Watch the video on how to check the motor to see how it is done.
If my videos help you and you want to support my website You could PayPal me at the link below