Not Starting GE
Gas Dryer




Learn How To Fix A Not Starting GE Gas Dryer 



If your problem is a not starting GE gas dryer, you will need to check the parts shown in the videos below until you find out the part or parts that are preventing your dryer from working properly.

Most of the times is one part that is preventing the dryer from working properly, but also could be more than one part.

If you want to save time, money and headaches don't do anything with the dryer until you know the parts that you need to check according to the problem with the dryer. 

If you follow what I show you, you will be able to fix the dryer most of the times unless it cost too much to replace the parts and will be best to replace the dryer.





Taking Apart

The first thing that you need to learn to be able to fix your not starting GE gas dryer, is how to take it apart and put it back together again properly.

When you know how to dismantle the dryer, every repair becomes easier do. The hardest thing to do when making a repair is dismantling and reassembling the dryer.

So my advice to you is, learn how to dismantle and put the dryer back together properly, before trying to do the repairs.

Click Here To See The Video




The Wall Outlet

In order for the dryer to be able to start, there have to be the right voltage present at the wall outlet. If you don’t have the proper voltage you will need to check the wall outlet.

Click Here To See The Video




Hi Limit Thermostat Right 

This thermostat is like a thermal fuse that is connected in series with the motor circuit. If the dryer airflow is obstructed, the dryer will overheat blowing the hi limit thermostat and stopping the motor from running. My video will show you how to check and replace this thermostat.

Click Here To See The Video




Idler Spring Switch

This is a safety switch that is connected in series with the motor circuit. It is activated or turn on when the belt is in place around the drum, idler pulley and the motor. It is used to stop the motor from running if the belt breaks off.

If you set the timer on a drying cycle and push on the start button and the dryer runs as long as you are pushing on the start button. But when you let go of the start button the motor stops running, you need to check the belt to see if it is broken or the idler spring switch to see if it is bad.

Click Here To See The Video




The Start Switch

This switch is only used to start the motor in the dryer. Once the motor starts running this witch is out of the motor circuit. If this switch is bad the motor is not going to start and the dryer is dead.

Click Here To See The Video




The Door Switch

This is another safety switch that is connected in series with the motor circuit. It is used to stop the motor from running if the door on the dryer is open while you are using the dryer. If you open the dryer door while the dryer is drying a load of clothes, the motor should stop running.

There 2 ways that this switch gets bad. If the dryer runs with the door open, the contacts are welded together and if a kid or a pet get inside of the dryer drum they could get hurt. And the other way is if the contacts inside of the switch fails to close when the door is closed. If you have either of these problems then you need to replace the switch.

Click Here To See The Video




The Motor

The motor is the work horse of the dryer. It is use to turn the tumbler and to complete the heating element circuit. A bad motor could be the cause of a not starting Ge gas dryer.

Click Here To See The Video-1

Click Here To See The Video-2




The Timer

The timer is the brains of the dryer. All the contacts inside of the timer are use to direct electricity to all the different electrical parts inside of the dryer. With time and amount of usage of the dryer, the contact inside of the timer wear out or burn causing the timer not to work they way that is design for and could be the cause why the dryer is not starting.

Any one of the mentioned parts could be the cause of the not starting GE gas dryer

Click Here To See The Video



You will need to make sure to watch the videos a few times until you know how to fix a not starting GE gas dryer. Never assume that a part is bad without checking it and make sure it is bad before replacing it.

Another thing that you need to do is to learn how to check, remove and install the parts before starting to buy replacement parts.

Make sure that the company that you buy parts from give you a good return guarantee in case that you may need to return any parts.

WE recommend  Repair Clinic  for their 365 days return guarantee

Also take the purchase slip and the old part and put them in the box of the new part so in case you need to return any parts you will know where the box and the slip are.

This the end of the not starting GE gas dryer page.








Home Page




© Copyrighted 2017 2018 Angel Acevedo. All rights reserved