Not Starting
Performa Washer

Learn How To Fix A Not Starting Performa Washer 

My not starting Performa washer videos will show you what to check when your washer is not starting in any of the cycles that you tried it on, in other words the washer is dead.

You will need to check the following parts until you find out the part that needs to be replace to fix the washing machine.

Here I am going to give you a brief description of the parts you need to check, and below you will have the links to the videos that will show you how the repairs are done.

The Wall Outlet

The first thing that you need to make sure, is that there is electricity in the outlet that the washer is connected to. The easier way to do that is by disconnecting the washer from the outlet and connecting a hair dryer that you know is in good working order on the outlet.

Turn the hair dryer on. If the hair dryer works, then the problem is in the washer. If the hair dryer doesn't work, then the problem could be on the fuse or circuit breaker box or on the wall outlet.

Click Here To See The Video

Power Cord

The power cord transfers the electricity from the wall outlet to the washer timer. If one of the lines in the cord is open, electricity will not flow to the washer and the washer is not going to start.

Click Here To See The Video

The Lid Switch

This switch is a safety device use to prevent the motor in the washer from running if the door is open or if the switch is bad. There are 2 different door or lid switches in use, the old style and the newer style lid switch. You will learn how to check them both in the video links below. 

Click Here To See The Video

Timer On/Off Switch

This switch is used to turn the timer on after you have selected the cycle that you want to run the washer on. The set of contacts inside of the timer are the ones that when the are close allows the electricity to flow to the timer and when they are opened, the washer is dead.

Click Here To See The Video

Motor Overload Switch

This switch is located in the motor and the purpose of this witch is to open when the windings in the motor get too hot and close when the windings cool down. If this switch stays opened, the washer is not going to do anything in other words you will have a not starting Performa washer problem.

Click Here To See The Video

You will need to make sure to watch the videos a few times until you know how to fix a not starting Performa washer. Never assume that a part is bad without checking it and make sure it is bad before replacing it.

Another thing that you need to do is to learn how to check, remove and install the parts before starting to buy replacement parts.

Make sure that the company that you buy parts from give you a good return guarantee in case that you may need to return any parts.

WE recommend  Repair Clinic  for their 365 days return guarantee

Also take the purchase slip and the old part and put them in the box of the new part so in case you need to return any parts you will know where the box and the slip are.

This is the end of the not starting Performa page.

Home Page

© Copyrighted 2017 2018 Angel Acevedo. All rights reserved