Not Draining Performa Washer



Learn How To Fix A Not Draining Performa Washer

If your problem is a not draining Performa washer 

You will need to check the following parts until you find out the part that needs to be replace to fix the washing machine.

Here I am going to give you a brief description of the parts you need to check, and below you will have the links to the pages with the videos that will show you how the repair is done.

Obstructions: If the problem with your Performa washer is that it fills to the selected level, agitates properly, but is not removing the water at all or is only removing it partially.

The problem could be an obstruction somewhere between the tub and the drain hose.

You will need to bail out the water from the tub, and make sure that there is no water left on the tub to pump hose and the pump to drain hose.

Make sure to get a couple of towels to clean any water spills on the floor when disconnecting the hoses. To see how to check & remove any obstructions in a Performa washer, view the video below 

Click here to see the video


The Pump: If the problem with your Performa washer is that is not removing the water from the tub, is leaking water, or is making noises like metal rubbing against metal, the problem could be a bad pump.

The impeller bearings inside of the pump wear out in a few years of use, and the pump start leaking water and making metal to metal grinding noises.

To check it out do the following. Pull the washer out a little away from the wall, lean the washer against the wall, make sure is secure and is not going to fall on top of you, derail the belt from the motor, transmission, and pump pulleys.

Turn the pump pulley by hand, and put a little pressure to the sides when turning it if it feels like is rubbing metal to metal, or is has movement side to side the pump is bad, and must be replace.

Click here to see the video


You will need to make sure to watch the videos a few times until you know how to fix a not draining Performa washer. Never assume that a part is bad without checking it and make sure it is bad before replacing it.

Another thing that you need to do is to learn how to check, remove and install the parts before starting to buy replacement parts.

Make sure that the company that you buy parts from give you a good return guarantee in case that you may need to return any parts.

We recommend Repair Clinic because they give you a 365 days hassle free return guarantee   Click here to check it out  

Also take the purchase slip and the old part and put them in the box of the new part so in case you need to return any parts you will know where the box and the slip are.

This is the end of the not draining Performa washer page











© Copyrighted 2017 2018 Angel Acevedo. All rights reserved