Not Draining Whirlpool Washer 

Learn How To Fix A Not Draining Whirlpool Washer 

The first thing that you need to check when you have a not draining Whirlpool washer is the drain hose. You need to make sure that drain hose is not kink restricting the flow of water from the washer to the drain pipe.

Also make sure that the drain hose is just long enough to reach the drain pipe, this will eliminate the chances of the hose getting kinked.

Obstructions: You will need to check for objects mainly small pieces of clothing that could obstruct the flow of water to the drain pipe. Check the drain hole on the tub, the hose from the tub to the pump, the inside of the pump and the hose from the pump to the drain hose.

If the hose is coming out of the washer from the bottom, you could lower the hose into a pan to see if water comes out into the pan.

Click here to see the video

The water pump: Most of the draining problems happened inside of the pump. Small pieces of clothing like kids socks, handkerchiefs and other small clothing will get stuck inside of the water pump preventing the washer from draining properly or not draining at all.

Be careful when washing kids clothes, and never wash pillows because they could break and the stuffing will stuck in the pump. 

Click here to see the video

Keep on mind that in order for the washer to drain the water from the tub, the motor must run to turn the pump impeller to push the water out of the pump.

You will need to make sure to watch the videos a few times until you know how to fix a not draining Whirlpool washer. Never assume that a part is bad without checking it and make sure it is bad before replacing it.

Another thing that you need to do is to learn how to check, remove and install the parts before starting to buy replacement parts.

Make sure that the company that you buy parts from give you a good return guarantee in case that you may need to return any parts.

WE recommend  Repair Clinic  for their 365 days return guarantee

Also take the purchase slip and the old part and put them in the box of the new part so in case you need to return any parts you will know where the box and the slip are.

End of the not draining Whirlpool washer page.

© Copyrighted 2017 2018 Angel Acevedo. All rights reserved