Not Agitating Performa Washer 




Learn How To Fix A Not Agitating Performa Washer 



If your problem is a not agitating Performa washer

You will need to check the following parts until you find out the part that needs to be replace to fix the washing machine.

Here I am going to give you a brief description of the parts you need to check, and below you will have the links to the pages with the videos that will show you how the repair is done.




Please read the disclaimer page before viewing the videos


The Agitator

If the problem with your Performa washer is that the washer fills with water, the motor runs, but the agitator won’t agitate to clean the clothes, the problem could be a bad or stripped agitator.

To check the agitator out do the following.  With the washer empty, open the door grab the agitator by the vanes and try to turn it clockwise and counterclockwise

If you can’t easily turn it clockwise and counterclockwise, the agitator is ok and the problem is   somewhere else.

If you can easily turn it clockwise and counterclockwise, the agitator is bad and you will need to replace it. To see how to check & replace the agitator in a Performa washer, view the video below.







The Belt

If the problem with your Performa washer is that the motor runs, but the washer won’t agitate, drain, or spin. The problem could be a broken or worn out belt.

To check the belt the washer needs to be empty of water. Pull the washer forward and lean it against the wall so you could take a look under.

Now you could look under to see if the belt is broken or worn out. If the belt is broken or worn out, you should replace the belt and the motor pulley. To see how to check & replace the belt in a Performa washer, view the video below 







How The Transmission Work

If the problem with your Performa washer is that the motor runs, the belt turns ok, but the washer not agitating the clothes or spin, then the problem could be a bad transmission. To see how to check the transmission in a Performa washer, view the video below 







How To Replace The Transmission

If the problem with your Performa washer is that the motor runs, the belt turns ok, but the washer won’t agitate or spin, then the problem could be a bad transmission.

To replace the transmission you will need to remove the top and front panels. And remove the complete drum assembly with the transmission attached to it. It will be easier for you to learn how to do it by seeing how it is done. To see how to replace the transmission in a Performa washer, view the video below 






You will need to make sure to watch the videos a few times until you know how to fix a not agitating Performa washer. Never assume that a part is bad without checking it and make sure it is bad before replacing it.

Another thing that you need to do is to learn how to check, remove and install the parts before starting to buy replacement parts.

Make sure that the company that you buy parts from give you a good return guarantee in case that you may need to return any parts.

WE recommend  Repair Clinic  for their 365 days return guarantee

Also take the purchase slip and the old part and put them in the box of the new part so in case you need to return any parts you will know where the box and the slip are.

This the end of the not agitating Performa washer page.











© Copyrighted 2017 2018 Angel Acevedo. All rights reserved