Noisy Performa Washer Videos



Learn How To Fix A Noisy Performa Washer

If you have a noisy Performa washer

You will need to check the following parts until you find out the part that needs to be replace to fix the washing machine.

Here I am going to give you a brief description of the parts you need to check, and below you will have the links to the pages with the videos that will show you how the repair is done.

Brake Assembly: If the problem with your Performa washer is that is making a screeching noise when it finishes the spin cycle or the drum is turning when the washer is agitating, the problem could be a worn out brake lining. 

The best way to learn how to remove & replace the brake lining is by seeing how it is done. To see how to check & replace the brake lining in a Performa washer, view the video below 

Click here to see the video


Snubber Ring: If the problem with your Performa washer is that the tub assembly goes out of balance no matter how small is the load and it hits the cabinet. The problem could be a worn out snubber ring.

The snubber ring is made of a plastic like Teflon. The purpose of this ring is to keep the drum assembly on the middle when the washer is spinning.

A lot of people replace the drum assembly supporting springs thinking that this will take care of the problem, to find out that the problem is not the springs, but it is the snubber ring.

To see how to check & replace the snubber ring in a Performa washer, view the video below 

Click here to see the video


Pump: If the problem with your Performa washer is that is not draining the water from the tub, is leaking water, or is making noises like metal rubbing against metal, the problem could be a bad pump.

The impeller bearings inside of the pump wear out in a few years of use, and the pump start leaking water and making metal to metal grinding noises. 

Click here to see the video


The Motor: If the problem with your Performa washer is that the motor is not starting to make the washer agitate or spin, the problem could be a bad motor and it has to be replace.

The easier way to learn how to replace the motor is by seeing how it is done. To see how to replace the motor in a Performa washer, view the video below.

Click here to see the video


Motor Checking: If the problem with your Performa washer is that the motor is not starting to make the washer agitate or spin, the problem could be a bad motor.

The easier way to learn how to check the motor to see if is good or bad is by seeing how it is done. To see how to check the motor in a Performa washer, view the video below.

Click here to see the video


You will need to make sure to watch the videos a few times until you know how to fix a noisy Performa washer. Never assume that a part is bad without checking it and make sure it is bad before replacing it.

Another thing that you need to do is to learn how to check, remove and install the parts before starting to buy replacement parts.

Make sure that the company that you buy parts from give you a good return guarantee in case that you may need to return any parts.

We recommend Repair Clinic because they give you a 365 days hassle free return guarantee   Click here to check it out  

Also take the purchase slip and the old part and put them in the box of the new part so in case you need to return any parts you will know where the box and the slip are.

This is the end of the noisy Performa washer page











© Copyrighted 2017 2018 Angel Acevedo. All rights reserved