Making Noises
GE GasDryer

Learn How To Fix A Making Noises GE Gas Dryer 

If your problem is a making noises GE gas dryer, you will need to check the parts shown in the videos below until you find out the part or parts that are preventing your dryer from working properly.

Most of the times is one part that is preventing the dryer from working properly, but also could be more than one part.

If you want to save time, money and headaches don't do anything with the dryer until you know the parts that you need to check according to the problem with the dryer. 

If you follow what I show you, you will be able to fix the dryer most of the times unless it cost too much to replace the parts and will be best to replace the dryer.

Taking Apart

The first thing that you need to learn to be able to fix your making noises GE gas dryer, is how to take it apart and put it back together again properly.

When you know how to dismantle the dryer, every repair becomes easier do. The hardest thing to do when making a repair is dismantling and reassembling the dryer.

So my advice to you is, learn how to dismantle and put the dryer back together properly, before trying to do the repairs.

Click Here To See The Video

Front Drum Bearing Assembly

The front side of the tumbler or drum rides on top of 4 Teflon slides or glides that are inserted on top of a plastic assembly that is connected on the front panel. When the Teflon slides or glides wear out, the front of the tumbler starts riding on top of the plastic assembly and the dryer starts to make scraping noises. If the dryer starts making these noises you will need to check the front bearing assembly. Check this video to learn how to fix a making noises GE gas dryer

Click Here To See The Video

Rear Drum Bearing Assembly

The back side of the tumbler rides on a rear drum bearing assembly that consist of a metal piece with a shaft that screws to the tumbler, another metal piece with a hole that gets screwed to the back panel and a Teflon sleeve that is inserted on the piece with the shaft.

This Teflon piece prevents the tumbler from riding metal to metal. When the Teflon sleeve wears out the dryer start to make a chirping or screeching noise that sounds like birds inside of the dryer.  

Click Here To See The Video

Blower Wheel

The blower wheel is used to suck air from the outside of the dryer and direct it through the heating elements, then through the tumbler and to the outside of the dryer. The blower wheel is attached tone side of the motor shaft and when the motor runs the blower wheel runs too.

The main reason why the blower wheel starts making noises is because something falls on to of the blower. Another reason is that lint accumulates on the blower wheel and it throws the blower out of balance and the dryer starts vibrating and runs noisy.

Click Here To See The Video

The Motor

After so much usage and the amount of time that you own the dryer, the motor bearings wear out and the motor runs noisy. I would use the dryer with a noisy motor as long as I could stand the noise.

Click Here To See The Video-1

Click Here To See The Video-2

You will need to make sure to watch the videos a few times until you know how to fix a making noises GE gas dryer. Never assume that a part is bad without checking it and make sure it is bad before replacing it.

Another thing that you need to do is to learn how to check, remove and install the parts before starting to buy replacement parts.

Make sure that the company that you buy parts from give you a good return guarantee in case that you may need to return any parts.

WE recommend  Repair Clinic  for their 365 days return guarantee

Also take the purchase slip and the old part and put them in the box of the new part so in case you need to return any parts you will know where the box and the slip are.

This the end of the making noises GE gas dryer page.

Home Page

© Copyrighted 2017 2018 Angel Acevedo. All rights reserved