Making Noises
Maytag Electric Dryer



Learn How To Fix A Making Noises Maytag Electric Dryer

If your Maytag electric dryer is making noises. You will need to check the following parts until you find out the part that needs to be replace to fix the dryer.

Here I am going to give you a brief description of the parts you need to check, and below you will have the links to the pages with the videos that will show you how the repairs are done.


Taking apart: The first thing that you need to learn to be able to fix your Maytag electric, is how to take it apart and put it back together again properly.

When you know how to dismantle the dryer, every repair becomes easier do. The hardest thing to do when making a repair is dismantling and reassembling the dryer.

So my advice to you is, learn how to dismantle and put the dryer back together properly, before trying to do the repairs. 

Click here to see the video


Drum rollers: The drum rollers are located on the back wall of the dryer. The drum rides on top of the rollers and they support the drum in place. With time and the amount of use of the dryer the metal bearing inside of the rollers wear out and the dryer starts to run loud. 

Click here to see the video


Front drum slides: These slides are made of hard Teflon strips and the front of the tumbler drum slides on them instead of using wheels. With time and usage they wear out and the drum starts to rub metal to metal making scraping sounds. They are attached to the front support panel with aluminum rivets. Watch the video to see how this repair is done. 

Click here to see the video


Blower wheel: This wheel is like a fan and it is sued to suck air from the outside, pass it through the heating element and through the tumbler then exhausting to the outside. The hole in the center of the wheel is in a D shape and when the hole gets rounded the blower wheel gets loud and doesn't move the air properly throw the dryer.

Click here to see the video    


Idler pulley: This part uses a wheel that the belt rides on top of it. It is used to give the belt the proper tension. This wheel is made of hard plastic and eventually will wear out and becomes noisy requiring to be replace. Watch the video according to which one your dryer uses.

Click here to see the video    Click here to see the older idler pulley


Drum baffles: These parts are used to move the clothes inside of the tumbler so they don't bunch up and dry faster. With time the screws that hold the drum baffles in place become loose and the baffles start to clank against the tumbler when the tumbler turn around. Tightening the holding screws takes care of this problem. Watch the video that show how this repair is done.

Click here to see the video


The motor: As the motor gets older the bearings wear out and the motor makes noises. There is nothing you could do to the motor except replacing it with a new one.

Click here to see the video


You will need to make sure to watch the videos a few times until you know how to fix a Maytag electric dryer. Never assume that a part is bad without checking it and make sure it is bad before replacing it.

Another thing that you need to do is to learn how to check, remove and install the parts before starting to buy replacement parts.

Make sure that the company that you buy parts from give you a good return guarantee in case that you may need to return any parts.

We recommend Repair Clinic because they give you a 365 days hassle free return guarantee   Click here to check it out  

Also take the purchase slip and the old part and put them in the box of the new part so in case you need to return any parts you will know where the box and the slip are.











© Copyrighted 2017 2018 Angel Acevedo. All rights reserved