Not Heating Whirlpool
29 Inch Gasc Dryer



Learn How To Fix A Not Heating Whirlpool 29 Inch Gas Dryer  

If your problem is a not heating Whirlpool 29 inch gas dryer. You will need to check the following parts until you find out the part that needs to be replace to fix the dryer.


DISCLAIMER: This website contains Amazon affiliate links, which means that if you click on one of the product links, and buy the product I’ll receive a small commission. This help support the channel and allows us to continue to make more free videos available to you . Thank you for your support!

Please read the disclaimer page before viewing the videos

Taking Apart

In order to be able to fix your Whirlpool 29 inch dryer you need to learn how to take it apart and how to put it back together again properly. Watch the video below to learn how to do this.



The Igniter

The Igniter is use to ignite the gas when it is released by the gas valve. Watch the video below to learn how to do this.



Flame Sensor

The flame sensor is a switch use to turn on and off the igniter as needed. This switch is controlled by heat. When the timer calls for heat the igniter starts to get hot until is red hot. The heat from the igniter close the flame sensor and the gas valve opens to release the gas. When the gas reach the still red hot igniter it get ignited to start the dryer drying the clothes.  Watch the video below to learn how to do this.



Thermal Fuse

The thermal fuse is a safety device use to make sure that the temperature inside of the drum is at the proper temperature. If the thermal fuse blows the dryer will run but it will not produce heat.  Watch the video below to learn how to do this.



Gas Valve Coils

The gas valve coils job is to open the gas valve when timer on the dryer calls for heat. Watch the video below to learn how to do this.



Thermal Cut Off Thermostat

This thermostat is use to open the heating circuit if the dryer has an obstruction to the airflow to the outside. Watch the video below to learn how to do this.



Operating Or Cycling Thermostat

This thermostat is use to open and close the circuit to the heating element when the temperature reach preselected  temperature. Watch the video below to learn how to do this.



Hi Limit Thermostat

This thermostat is use to open the circuit to the heating element if the airflow coming into the dryer is restricted. Watch the video below to learn how to do this.



The Motor

The motor could be running properly but if the contacts of the centrifugal switch are burned out the dryer will not heat up. Watch the video below to learn how to do this.






Click here to visit my YouTube channel  



© Copyrighted 2018   2019  Angel Acevedo. All rights reserved