| If the problem that
you are having is that your Whirlpool direct drive washer is
leaking, you will need to check the following parts until you find
where the washer is leaking from.
Water mixing valve: The
water mixing valve is the first place the water from the faucets
reach the washer. You could have a cracked in the water valve,
pinholes or cracks in the fill hoses or missing rubber washers in
the hoses.
The
pump: Another part that
leaks often, is the pump. In this washer the pump is attached to the
motor. Worn out pump bearings could be the cause of the water leak.
The
tank or tub: The tank on
the Whirlpool direct drive washer is made of plastic and some times
it develop cracks causing the washer to leak water.
Faulty water level switches or water
mixing valve can cause the washer to overflow and leak all over the
place.
The holding tank center seal could
dry out and cause the washer to leak water too.
Finally you will need to check each
one of the hoses in your washing machine.
As you could see, there are many
places that your Whirlpool direct drive washer could be leaking
water from.
You will need to check each one until
you find the part that is leaking. |
